Super Servo (Discontinued)
Features
- Compact motor with integrated gearbox
- 4mm D-shaft
- 3-wire servo interface
- 10W max power draw
- Continuous rotation only
Specifications
- Stall Current 1.7A
- Free Current 0.18A
- Stall torque (continuous) 0.6kg•cm
- Stall torque (peak) 1.3kg•cm
Peak stall torque is provided at startup. If a stall condition continues to occur, the controller will taper the torque output linearly until it reaches 0.6kg•cm over a period of 45 seconds.
This is to thermally protect the controller and motor, and to maintain compliance with the REV Hub's 2A per servo channel limit.
Looking for the current model? See the Super Servo Plus.